getuncabled
Menu

Devices

Hardware reference pages: specifications, firmware support and UK power notes. These are reference notes, not reviews or scores, and we do not sell anything.

ESP32 boards

  • Heltec WiFi LoRa 32 V3

    ESP32-S3 and SX1262 LoRa board with Wi-Fi, Bluetooth LE and an OLED. Runs Meshtastic, MeshCore and RNode; 21 dBm max, within the UK 500 mW slot.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): supported

    Updated 29 Oct 2026

  • Heltec WiFi LoRa 32 V4

    ESP32-S3 board with an SX1262 and a power-amplifier front end rated 28 dBm. Needs its TX power set with a UK antenna in mind to stay under 500 mW e.r.p.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): supported

    Updated 29 Oct 2026

  • Seeed XIAO ESP32S3 + Wio-SX1262 kit

    Tiny ESP32-S3 and SX1262 Meshtastic kit, 21 x 18 mm, with a 2 dBi antenna, no screen and no battery. Max TX power not stated.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): supported

    Updated 29 Oct 2026

nRF52 boards

  • Heltec Mesh Node T114

    nRF52840 and SX1262 LoRa board with Bluetooth LE, optional GNSS and optional TFT. Rated 21 dBm; supported by Meshtastic, MeshCore and RNode.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): supported

    Updated 29 Oct 2026

  • RAK WisBlock 4631 Starter Kit

    Modular nRF52840 and SX1262 kit (RAK4631 on a RAK19007 base) for low-power fixed and solar nodes. Up to 22 dBm; Meshtastic, MeshCore, RNode.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): supported

    Updated 29 Oct 2026

Handhelds & trackers

  • LILYGO T-Deck / T-Deck Plus

    ESP32-S3 and SX1262 messenger with a 2.8 inch screen, keyboard and trackball. The Plus adds GPS and a battery. Meshtastic, MeshCore and RNode supported.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): supported

    Updated 29 Oct 2026

  • LILYGO T-Beam Supreme

    ESP32-S3 and SX1262 board with GPS, 18650 holder and OLED. Runs Meshtastic, MeshCore and RNode. Max TX is not stated; the T-Beam 1W is over UK limits.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): supported

    Updated 29 Oct 2026

  • LILYGO T-Echo

    nRF52840 and SX1262 handheld with GPS, a 1.54 inch e-ink screen and a battery. Runs Meshtastic, MeshCore and RNode; max TX power not stated.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): supported

    Updated 29 Oct 2026

  • Heltec Wireless Tracker

    ESP32-S3 and SX1262 board with onboard GNSS and a colour TFT. V1.x is rated 21 dBm; V2 is rated 28 dBm. Meshtastic and MeshCore supported.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): unconfirmed

    Updated 29 Oct 2026

  • Seeed SenseCAP Card Tracker T1000-E

    Credit-card-sized, IP65 nRF52840 tracker with an LR1110 radio, GNSS and no screen. Meshtastic and MeshCore supported; max TX power not stated.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): unconfirmed

    Updated 29 Oct 2026

Legacy

  • Station G2 (discontinued)

    B&Q Consulting Station G2: ESP32-S3 base station with an external power amplifier claimed at 35 dBm. Discontinued per Meshtastic; not a UK buy.

    • Meshtastic: supported
    • MeshCore: supported
    • RNode (Reticulum): unconfirmed

    Updated 29 Oct 2026